Please find below examples of our range of Safety Gate Monitoring Relays. For more information about these products call our Technical Helpline on 01245 324432, Email your request to admin@dold.co.uk , or submit an information request form. If you require more help on selecting your relay, why not try the Relay Selection page.

BD 5985.02
BN 5986.02

In an industrial process where machinery is separated from the operator by a safety gate or grid, it is essential that a control mechanism is established to ensure that;
(a) the machine can only be started when the gate is closed,
(b) the machine is stopped when the gate is opened.

Model BD 5985 has been designed to operate in conjunction with two mechanical switches whose operation is governed by the physical position of the safety gate. The final arrangement will satisfy the above conditions and furthermore will only permit restart if the gate is closed in a prompt positive fashion. The relay will fail to the safe position in the event of component/wiring failure. Housed in a compact 45 mm wide enclosure suitable for DIN rail mounting BD 5985 is fitted with positive guided contacts and incorporates redundant self checking circuitry. The unit complies with VDE0435 (IEC255). VDE0113 (IEC 204-1) and German Employers Liability Association ZH1-457.

• This unit is suitable for Category 3 applications.

Model BN 5986.02 meets all the requirements above and has the following features:-

• Cross fault monitoring of the gate switch circuits via two sets of changeover switch contacts.
• A remote reset facility, to avoid gate operation on machine start up.
• LED indication.
• This unit is suitable for Category 4 applications.