Solid-state relay / contactor PI 9260

Load voltage

Load current

Semiconductor output

Control voltage

Approvals and Markings

Variant

Article number: 0067462
Type: PI9260.92/000/06 AC48-480V 30/12A

The solid-state relay PI 9260 was developed for switching resistive threephase A.C. current... more

Close menu

Product description

The solid-state relay PI 9260 was developed for switching resistive threephase A.C. current loads, and therefore serves as a replacement for an electronic contactor. Both 2-phase and 3-phase controlled versions are available. The DCB technology (direct copper bonding) ensures very good thermal transmission, so that high load currents are possible. The solidstate relay can be mounted on a variety of cooling surfaces. The device is also available as a ready-to-use version with a pre-dimensioned heat sink. This can simply be snapped onto a wide DIN rail. An LED display signals the status of the control input. The voltage range of 10 to 32 V allows for operation on digital controllers (PLC) or simple temperature regulators.

Technical specifications

Widths:	67,5 mm
Number of poles:	2-pole, 3-pole
Load voltage up to:	AC 600 V
Load current up to:	60 A
On/Off Input Control:	AC, DC
Auxiliary voltage:	DC 24 V
Peak reverse voltage up to:	1600 Vp
Type:	PI 9260

Downloads

Advantages

High switching frequency and long life
With heat sink for DIN rail mounting
Silent vibration and shock resistance
Providing outstanding EMC properties

Features

Three Phase AC solid-state contactor
Meets generally the requirements of IEC/EN 60947-4-3
Zero cross or instant-on switching
2 anti-parallel thyristors for each pole
Direct copper bonded (DCB) technology
Self-lifting box contact terminals
Peak reverse voltage up to ±1600Vp
Wide range AC and DC input control voltage
Delivered with integrated heat sink for DIN rail mounting
IP20 Touch protection