Motor brake relay
GB 9034

The electronic motor brake relay GB 9034 from the MINISTOP series enable wear-free braking of three-phase and alternating current asynchronous motors. The braking devices are used for drives that must be reliably braked for safety and functional reasons. Depending on the device version and the user‘s specification, the braking current switches off after a set braking time or via the integrated standstill detection after the motor has come to a standstill. With standstill-dependent braking, a potential-free signal contact signals if the motor has not come to a standstill within the maximum braking time.

Advantages
. Higher safety and economic efficiency due to shorter run-out times
. Easy to fit also into existing control circuits
. Wear and maintenance free
. Can be used on all asynchronous motors
. Adjustable braking current
. With automatic standstill monitoring

Features
. According to IEC/EN 60947-4-2
. DC brake with one way rectifier up to max. 600 A
. Integrated braking contactor, for devices up to 60 A
. As option with indicator relay for standstill monitoring
. As option with star-delta start function
. As option with thermistor motor protection
. As option with wide voltage input: 200 ... 690 V
. Max. 310 mm width

Technical specifications
Width: 110mm
Temperature monitoring: Yes
Signalling output: Yes
Braking current adjustable up to max.: 600A
Braking time adjustable up to max.: 320s
Automatic standstill monitoring: Yes
External brake contactor required: Yes
Type: GB 9034


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: GB9034 100A AC50/60HZ 400V
Art. No.: 0056975