Enclosure series K 70
Enclosure system with many widths proved in various applications
This consistent enclosure range allows for an especially fine graded adjustment to the size of the electronics. Thus, this enclosure system not only covers the common widths from 22.5 mm to 150 mm, but also provides intermediate sizes such as 32.5 mm or 55 mm. These enclosures are suitable for both DIN rail mounting and screw mounting.
Please select required language:
Brochure, Product overview enclosures, File: pdf, File size 2 MB
Choose a product:
Switch cabinet enclosure KO 4752
• Width 22.5 mm
• Max. 12 plus-minus-terminals screws with
self raising terminal washers
• With flat connector A 2,8 x 0,8
DIN 46 244 (on request)
• Electrical connection of printed circuit
board to terminal via wire strands
• Mounting of SMD components possible
on soldering side
• Blind plugs possible in place of
connection terminals
• Optionally with terminal covers for contact
protection complies with VBG 4
Switch cabinet enclosure KO 4753
• Width 22.5 mm
• Max. 8 plus-minus screws with self-raising
terminal washers
• Secure clamping of max. 2 connection
wires with differing cross section
• Braided wire connection between
terminals and printed circuit boards
• Terminal cover as option, complies with
contact protection VBG 4
Switch cabinet enclosure KO 4756
• Width 22.5 mm
• Max. 12 plus-minus captive terminal screws
with self-raising terminal washers
• Secure clamping of max. 2 connection
wires with differing cross section
• Machine solderable connections,
stranded cable connection possible
• Large area für control and indicating
components and legends.
• Housing supplied as single parts,
terminals prefitted in terminal blocks
Switch cabinet enclosure KO 4757
• Width 22.5 mm
• Max. 12 plus-minus captive terminal screws
with self-raising terminal washers
• Secure clamping of max. 2 connection
wires with differing cross section
• Machine solderable connections,
stranded cable connection possible
• Large area für control and indicating
components and legends.
• Housing supplied as single parts,
terminals prefitted in terminal blocks
Switch cabinet enclosure K 70/032,5A
• Width 32.5 mm
• Max. 6 plus-minus-terminal screws with
self raising terminal wahsers
• Mounting facility for screw-mounting of a PCB
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure K 70/045C
• Width 45 mm
• Max. 10 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure K 70/045D
• Width 45 mm
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure KO 4710
• Width 100 mm
• Max. 20 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure K 70/055A
• Width 55 mm
• Max. 12 plus-minus-terminal
screws with self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure K 70/075A
• Width 75 mm
• Max. 16 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• a base section for this enclosure is also
available without screw fixing recesses e.g.
suitable for DIN-rail mounting only
• Changeable Plate as option
Switch cabinet enclosure K 70/075B
• Width 75 mm
• Max. 16 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Changeable front plate as option
Switch cabinet enclosure K 70/100A
• Width 100 mm
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Switch cabinet enclosure K 70/150A
• Width 150 mm
• Max. 32 plus-minus-terminal screws with
self raising terminals washers
• Double contacts for direct insertion of PCB
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
More information
The enclosure series K 70 allows for an especially fine graded adjustment to the size of the electronics.
Competence on site
Damit wir für Sie Ihren persönlichen Ansprechpartner finden können, geben Sie bitte die fünfstellige Postleitzahl Ihres Ortes in das Suchfeld ein.
Agents for:
