• According to IEC/EN 60 255, DIN VDE 0435-303
• Recognizes fuse failures in three-phase mains up to 3 AC 690 V
• Can be used for all types and sizes of fuses
• Independent of phase sequence
• Signals even if loads are switched off
• No malfunction on
- asymmetrical mains
- mains with harmonic waves
- motors producing feedback
• Shorter response time than with motor circuit-breakers
• Green LED for intact fuses
• Red LED for fuse failure
• As option: open/closed circuit operation in the case
of IP 9075 programmable via X4-X5 or X3-X4
• As option: with manual reset function and remote reset,
programmable via X1-X2
• As option: 1 NO contact or 2 changeover contacts
• Devices available in 2 enclosure versions:
I-model: depth 59 mm, with terminals at the bottom for
installation systems and industrial distribution
systems according to DIN 43 880
S-model: depth 98 mm, with terminals at the top for cabinets
with mounting plate and cable duct
• IL 9075, SL 9075: width 35 mm
IP 9075, SP 9075: width 70 mm
• According to IEC/EN 60 255, DIN VDE 0435-303
• Recognizes fuse failures in three-phase mains up to 3 AC 690 V
• Can be used for all types and sizes of fuses
• Independent of phase sequence
• Signals even if loads are switched...
Function | Fuse Monitor |
1- / 3-phase | 3 |
Standard measuring range | 3 AC 380 ... 415 V |
Measuring range max. | 690 V |
Output contacts | 2 w; 1 s |
Enclosure design | Schaltschrank |
Width | 35 mm |
Type | SL 9075 |
Please select required language:
Datasheet / Operating Instructions, File: pdf, File size 271 KB