Dold Industries Ltd

11 Hamberts Rd. Blackall Ind. Estate
South Woodham Ferrers
GB-Essex, CM3 5UW
SP 9075

Fuse Monitor

SP 9075

Contacts

Nominal voltage

Variant

  • 0061134
  • SP9075.12/010 AC50...400HZ 600-690V
The fuse monitors IL/IP/SL/SP 9075 of the VARIMETER series monitor up to 3 load fuses. Early... more

Product description

The fuse monitors IL/IP/SL/SP 9075 of the VARIMETER series monitor up to 3 load fuses. Early detection of blown fuses, even when loads are switched off, and preventive maintenance prevent costly damage and, as a user, you benefit from the operational reliability and high availability of your system.

Technical specifications

Measuring range max.: 690 V
Standard measuring range: 3 AC 380 - 415 V
1- / 3-phase: 3
Output contacts: 2 C/O contacts
Width: 70 mm
Enclosure design: Switch cabinet
Type: SP 9075

Advantages

  • Increased system availability through early detection of fuse failures, which can cause considerable damage to systems
  • Rapid detection of fuse failures, even when consumers are switched off, ensures system availability at the earliest possible point in time
  • Reliable detection of fuse failure, even with an unbalanced or harmonic network and with regenerative motors

Features

  • According to IEC/EN 60255-1
  • Recognizes fuse failures in three-phase mains up to 3 AC 690 V
  • Can be used for all types and sizes of fuses
  • Independent of phase sequence
  • Shorter response time than with motor circuit-breakers
  • As option:
    - Energized on trip (output relay activated in the event of a fault)
    - De-energized on trip (output relay not activated in the event of a fault) with IP 9075 programmable via X4-X5 or X3-X4
  • As option with manual reset function and remote reset, programmable via X1-X2
  • 2 LED indicators
  • As option: 1 NO contact or 2 changeover contacts
  • Devices available in 2 enclosure versions:
    I-model: Depth 59 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43880
    S-model: Depth 98 mm, with terminals at the top for cabinets with mounting plate and cable duct
  • IL 9075, SL 9075: Width 35 mm
    IP 9075, SP 9075: Width 70 mm