Fuse Monitor
IP 9075
Article number:
0043896
Type:
IP9075.12 AC50...400HZ 480-550V
Description
The fuse monitors IL/IP/SL/SP 9075 of the VARIMETER series monitor up to 3 load fuses. Early detection of blown fuses, even when loads are switched off, and preventive maintenance prevent costly damage and, as a user, you benefit from the operational reliability and high availability of your system.
Technical specifications
| 1- / 3-phase: | 3 |
|---|---|
| Enclosure design: | Distribution board |
| Measuring range max.: | 690 V |
| Output contacts: | 2 C/O contacts |
| Standard measuring range: | 3 AC 380 - 415 V |
| Type: | IP 9075 |
| Width: | 70 mm |
Downloads
Advantages / Customer benefits
- Increased system availability through early detection of fuse failures, which can cause considerable damage to systems
- Rapid detection of fuse failures, even when consumers are switched off, ensures system availability at the earliest possible point in time
- Reliable detection of fuse failure, even with an unbalanced or harmonic network and with regenerative motors
Features
- According to IEC/EN 60255-1
- Recognizes fuse failures in three-phase mains up to 3 AC 690 V
- Can be used for all types and sizes of fuses
- Independent of phase sequence
- Shorter response time than with motor circuit-breakers
- As option:
- Energized on trip (output relay activated in the event of a fault)
- De-energized on trip (output relay not activated in the event of a fault) with IP 9075 programmable via X4-X5 or X3-X4 - As option with manual reset function and remote reset, programmable via X1-X2
- 2 LED indicators
- As option: 1 NO contact or 2 changeover contacts
- Devices available in 2 enclosure versions:
I-model: Depth 59 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43880
S-model: Depth 98 mm, with terminals at the top for cabinets with mounting plate and cable duct - IL 9075, SL 9075: Width 35 mm
IP 9075, SP 9075: Width 70 mm