Smart motorstarter, for Modbus
UG 9411
Article number:
0067522
Type:
UG9411PM AC230V 50/60HZ 2A 0-10S
Description
The smart motorstarter UG 9411 can be used for softstart, softstop, reversing and protecting 1 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.
Technical specifications
| 1- / 3-phase: | 1 |
|---|---|
| Auxiliary voltage: | DC 24 V |
| Bus interface: | Modbus RTU |
| Load current up to: | 7 A |
| Load voltage up to: | AC 230 V |
| Temperature monitoring: | Yes |
| Type: | UG 9411 |
| Width: | 22,5 mm |
Downloads
Advantages / Customer benefits
- Up to 6 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase failure monitoring
- Communication monitoring - Widely used measuring and automation protocol
- 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
- High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload - Pluggable clamps
- TWIN- connection terminals to loop auxiliary supply and Bus
Features
- According to IEC/EN 60947-4-2
- Modbus RTU-interface
- To reverse 1-phase motors up to 50 ... 180 W or 180 W ... 1.1 kW at 230 V
- 1-phase softstart, softstop
- 3 potentiometer for setting the modbus adress and baud rate
- 5 LEDs for status indication
- Reversing with relays without current, softstart, softstop with thyristor
- Galvanic separation between control circuit and power circuit
- Width: 22.5 mm
Similar Items
