Product questions ?

+

Direct contact: 01245 324432

or send us a message.

Smart motorstarter UG 9410

UG9410_Modbus.png

Features

• According to IEC/EN 60 947-4-2
• Modbus RTU-interface
• To reverse 3 phase motors up to 0.18 kW ... 2.2 kW at 400 V
• 2-phase softstart, softstop
• 3 potentiometer for setting the modbus adress and baud rate
• 5 LEDs for status indication
• Reversing with relays without current, softstart, softstop with thyristor
• Galvanic separation between control circuit and power circuit
• Width: 22.5 mm

• According to IEC/EN 60 947-4-2
• Modbus RTU-interface
• To reverse 3 phase motors up to 0.18 kW ... 2.2 kW at 400 V
• 2-phase softstart, softstop
• 3 potentiometer for setting the modbus adress and baud rate
• 5 LEDs for...

more...

Advantages / Customer benefit

• Widely used measuring and automation protocol
• Up to 7 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase sequence monitoring
- Phase failure monitoring
• 80 % less space
• Simple and time-saving commissioning as well as user-friendly
• Operation through parameterization via modbus
• Blocking protection
• Hybrid relay combines benefits of relay technology with
non-wearing semiconductor technology
• High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload
• Pluggable clamps
• TWIN- connection terminals to loop auxiliary supply and Bus

• Widely used measuring and automation protocol
• Up to 7 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase sequence monitoring
- Phase failure monitoring
• 80 % less...

more...
Function Smart motorstarter
Load voltage 3 AC 200 - 480 V
Auxiliary voltage DC 24 V
On/Off Input Control DC +
Temperature monitoring +
Bus interface Modbus RTU
Width 22,5 mm
Type UG 9410

Please select required language:

Datasheet / Operating Instructions, File: pdf, File size 183 KB

Documentation, User manual MODBUS, File: pdf, File size 324 KB

EPLAN Electric P8 Makro, UG 9410, File: zip, File size 79 KB

The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.

 

 

Your contact


    Competence on site

    Damit wir für Sie Ihren persönlichen Ansprechpartner finden können, geben Sie bitte die fünfstellige Postleitzahl Ihres Ortes in das Suchfeld ein.

    Contact for: