Motor Load Monitor BH 9097

Article number: 0053943
Type: BH9097.38 AC230V AC24A

The load monitor BH 9097 of the VARIMETER series reliably monitors the load of motors as well as... more

Product description

The load monitor BH 9097 of the VARIMETER series reliably monitors the load of motors as well as the functionality of electrical consumers. If the load exceeds or falls below the limit values, which can be set by means of a rotary switch, the corresponding output relay is activated. To suppress short-term load fluctuations, a response delay tv can be set. LEDs indicate the switching status of the associated output relays. Early detection of impending failures and preventive maintenance prevent costly damage, and as a user you benefit from the operational safety and high availability of your system.

Technical specifications

Width:	45 mm
1- / 3-phase:	1, 3
Measuring range max.:	40 A (37 kW)
Operate delay:	Yes
Auxiliary voltage:	Without, AC, DC
Output contacts:	2 x 1 C/O contacts
Enclosure design:	Switch cabinet
Type:	BH 9097

Downloads

Advantages

Identification of
- Underload P1 and Overload P2
- Overload P1 (prewarning) and Overload P2 programmable
Adjustment of P1 and P2 on absolute scale
For motors up to 22 kW / 400 V; 37 kW / 600 V
Large current range because of automatic range selection
De-energized or energized on fault, programmable
Early detection of irregularities
Reduced wiring effort

Features

According to IEC/EN 60255-1, IEC/EN 60255-26, DIN/VDE 0435-303
Measurement: Effective power
1 changeover contact for P1 and 1 changeover contact for P2
Adjustable start-up time delay ta
Adjustable switching delay tv
With automatic or manual reset, programmable
Test / Reset button for easy setup
Up to 40 A without external current transformer
Also for single-phase operation
LED indicators
Width 45 mm